TPA-6330 operational manual
Category：
Keywords：
Product details
Application
This method is suitable for testing wastewater with total phosphorus in the range of (0-50) mg/L, and can be customized according to the actual requirements of users.The online total phosphorus automatic analyzer is mainly used for real-time monitoring of municipal sewage, waste (sewage) water discharged by enterprises, surface water and other total phosphorus concentration online automatic monitoring. According to the complex and changeable working conditions on site, it is suggested to select water sample collection/distribution system, especially for the water with suspended solids. This method is mainly used for on-line automatic monitoring of total phosphorus concentration of waste (pollution) water discharge point source, surface water, etc.
General Introduction
TPA-6330 Total phosphorus online automatic analyzer is an online automatic analyzer which can be applied to the detection of total phosphorus in a variety of water bodies,
such as rivers and lakes, industrial sewage, chemical wastewater, domestic sewage and sewage treatment plants. This is second generation Analyzer based on the requirement of environmental protection new standard, with many good features like low reagent consumption, size miniaturization, reagent less quantitative, remote quality control, remote diagnosis maintenance... Through a large number of operating practices we adopt stable water sample collection/distribution system to provide a better application solution.
Technical parameters
|
Measurement Range
|
(0~50)mg/L(Total phosphorus concentration) |
|
Accuracy |
concentration≤0.5mg/L，less than ±0.05mg/L |
| Concentration>0.5mg/L,no more than ±10% | |
|
Repeatability |
≤5.0% |
|
Measurement period |
The minimum measurement period is 50 minutes (depending on the length of the digestion time). According to the actual water sample, the digestion time can be arbitrarily modified at (10 ~ 45) min. |
|
Sampling period |
1. Hourly mode 2. (1~999min)terminal for selection。 |
|
Calibration period |
20~720can be adjusted arbitrarily |
|
Maintainance Period |
usually once a month, about 30 minutes each time. |
|
Power supply |
AC 100~120V/200~240V，50/60Hz。Frequency：150W |
|
Output |
RS232＆RS485＆4~20mA |
| Environmental requirements | indoor temperature adjustable, recommended temperature (5 ~ 28) ° C; humidity ≤ 90% (no condensation). |
| Size | L*W*H：(400*202*800)mm |
Workshop
Online inquiry
CREATEC will be there where there is water
Focus on the independent research and development of online water quality analysis instruments and water environmental protection analysis instruments
ABOUT US
Hebei Create Instrumentation Technologies Co., Ltd. is a national high-tech technology enterprise which is specialized in the water quality online analysis instruments.The founder Hao shuanju was first awarded the national “Automatic Pure Water Monitor” patent in 1988.And entered into the field of water quality online analysis and research.
CONTACT US
Factory :NO.2 Building ,No.368 North Xinshi Road, Shijiazhuang 050091,Hebei Province,China.
Office Address: Block 23, Keying·Zhichuang Valley, Huai'an West Road, Luquan District, Shijiazhuang City
Tel： 86-311-83831058 / 67368592
E－Mail：meter@createc.cn
QUALITY OF SERVICE
Follow us
Learn more about online water quality analysis instruments