MPS-1400 Digital Multi-parameter integration sensor
Category：
Keywords：
Product details
Performance and characteristics
• Integration with pH,ORP,DO,conductivity,Turb/TDS,temperature and depth
• It has RS-485 output ,in line with the Modbus protocol.It Can be directly connected to industrial computer, PLC and any other i communication equipments in accordance with Modbus RTU format
• Address and baud rate canbe set freely.
• pH,ORP and DO sensors are equipped with quick transfer connector for easy replace.
• Turbidity sensor is equipped with auto clean device and manual maintenance is no needed.
• Completely sealed and st.st. body in IP68 protection level
• Easy installation and it can be placed into the water. the mobile and rapid response can be achieved.
Main technical features
|
Parameter |
Measurement range |
resolution |
accuracy |
|
|
Turbidity |
0.001-4000NTU |
range |
resolution |
(0-100)NTU less than the reading data 5% (100-1000)NTU±2.5%FS (1000-4000)NTU±2.5%FS |
|
0.001-10NTU |
0.001NTU |
|||
|
10-10NTU |
0.01NTU |
|||
|
100-1000NTU |
0.1NTU |
|||
|
1000-4000NTU |
1NTU |
|||
|
Suspended solid |
0-50 g/L |
range |
resolution |
less than the reading data 5%(depend on Homogeneity of the city active sludge) |
|
0-1.0g |
0.0001g |
|||
|
1.0g-10.0g |
0.001g |
|||
|
10.0g-50.0g |
0.01g |
|||
|
pH |
2.00-12.00 |
0.01 |
±0.1 |
|
|
ORP |
（-2000—2000）mV |
1mV |
±5mV |
|
|
DO |
（0-20）mg/L（ppm） |
0.01 mg/L（ppm） |
0.3mg/L（ppm） |
|
|
conductivity |
(0-2000)μS/cm (0-20)mS/cm |
0.1μS/cm |
1.5%（FS） |
|
|
Temperature |
（0.0-99.9）℃ |
0.1℃ |
±0.5℃ |
|
|
Depth |
0-40m |
0.1m |
±1% |
|
|
Communication port |
RS485，MODBUS RTU |
|||
|
Power supply |
DC 9-28V |
|||
|
Working environment |
Temp：（0-50）℃；Humidity：≤85% RH（non-condensing） |
|||
|
Storage enviornment |
Temp：（0-60）℃；Humidity：≤85%RH（non-condensing） |
|||
|
size |
102mm×465mm（D×L） |
|||
|
installation |
Immersion |
|||
|
Pressure |
0.4MPa |
|||
Workshop
Online inquiry
CREATEC will be there where there is water
Focus on the independent research and development of online water quality analysis instruments and water environmental protection analysis instruments
ABOUT US
Hebei Create Instrumentation Technologies Co., Ltd. is a national high-tech technology enterprise which is specialized in the water quality online analysis instruments.The founder Hao shuanju was first awarded the national “Automatic Pure Water Monitor” patent in 1988.And entered into the field of water quality online analysis and research.
CONTACT US
Factory :NO.2 Building ,No.368 North Xinshi Road, Shijiazhuang 050091,Hebei Province,China.
Office Address: Block 23, Keying·Zhichuang Valley, Huai'an West Road, Luquan District, Shijiazhuang City
Tel： 86-311-83831058 / 67368592
E－Mail：meter@createc.cn
QUALITY OF SERVICE
Follow us
Learn more about online water quality analysis instruments